PureHealth Mold Inspections
Confidence before you rebuild.
Before the walls close, we inspect the work, check moisture, and collect air and surface samples. We explain whether the areas meet our verification requirements or need more attention.
When to schedule your verification
Post-Remediation Verification is a separate service, scheduled after your remediation work is complete. Book it while containment is still up and the walls are still open.
If an area needs more attention, your contractor can take care of it right away without setting up containment again.
Open walls let us reach the structural materials that remain, so we can see and test them directly.
Our verification process
Seven steps that help us evaluate the work and identify anything that needs more attention.
- 1
Review the remediation records
Send us everything your remediation team gave you, including the scope, photos, notes and project records. The more we see of the process, the better we can verify it.
- 2
Walk the entire job
We check that the work reached its full extent, not just the obvious areas. If attic insulation was removed, for example, we check that it came out all the way down to the soffits. We check the edges and fringes of every work area.
- 3
Scan the whole property
A real-time air scan runs throughout the home, inside and outside the containment zones, so we can compare conditions across the property.
- 4
Measure humidity
We take humidity readings in every containment zone and outside them to confirm the conditions in each space.
- 5
Confirm the materials are dry
We check that remaining materials are dry, using moisture readings suited to each material.
- 6
Test the air in each work area
We collect air samples in each remediation zone for laboratory analysis.
- 7
Test the remaining surfaces
We sample materials that were cleaned and left in place, including areas that look clean and spots needing a closer check.
Your verification report
The report comes directly to you, and you are welcome to share it with your contractor.
Typical turnaround from the verification visit. We aim for less whenever we can.
Every remediation zone is documented with its findings and a clear status.
If an area needs more attention, the report lists specific next steps your contractor can follow. If more work is needed, we explain the corrections and help you plan any follow-up testing.
“They effectively collaborated with the remediation team and contractor we hired... Once done, PureHealth Mold came back and retested the areas that had been remediated.”
Before your visit
- Keep containment in place.
- Leave the walls and work areas open.
- Send everything you have from your remediation team.
- Let us know every area that was remediated.
Verification questions
Do the walls need to stay open?
Yes. Open walls let us see and test the structural materials directly, which gives us the clearest view before build-back.
Why does containment need to stay up?
If an area needs more attention, your contractor can correct it right away without setting up containment again.
Can you verify work based on another company’s assessment?
Yes, we are glad to help. Since we did not document the original conditions, we will review your records with you and confirm exactly which areas the verification covers.
When will I get my report?
Typically within 5 to 10 business days of the verification visit, and we aim for less whenever we can.
Who receives the report?
You do, directly. You are welcome to share it with your contractor.
Start with your property
Let’s talk about your home.
Tell us what’s happening in your home and what you’d like to understand. We’ll talk through the options and review scope, pricing, and scheduling with you before you book.
Talk with our team
Share your questions and the best way to reach you.